Improved braking on a Series Landrover. This will only work on Landrovers fitted with a brake servo.Initially leave the current brake vacuum system intact, because you may need to drive your Landrover to get parts. First get a "military" double water pump pulley from wherever you normally get used spares. Fit this to the water pump boss. It is held on by 4 x 10mm bolts if I remember. Obtain a "Peugeot" vacuum pump from a scrapyard, make sure that you also get the tension arm (a curved metal bracket with a slot in it which bolts to the pump). The pump has a double hole mount cast into the body of the unit, similar to the mountings on an alternator.Fabricate a mounting bracket to fit one of the holes in the pump body. i made the bracket from a piece of inch by eighth of an inch steel bar - you could make the bracket fancier to use both holes, but
Orignal From: IMPROVING THE BRAKES ON A SERIES LANDROVER
No comments:
Post a Comment